Hi-Therm JET 4.5 - a compact non-pressure instantaneous electric water heater for local hot-water supply above a sink or washbasin.
It is intended for one local draw-off point and combines a compact body with automatic activation by water flow. Water is heated only while it is being drawn, so the unit does not require a storage tank.
| Technical characteristics | Value |
|---|---|
| Model | JET 4.5 |
| Heating power | 4500 W |
| Current | 19,6 A |
| Supply voltage | 230/50 V/Hz |
| Maximum inlet water pressure | 6,5 bar |
| Minimum inlet water pressure | 0,4 bar |
| Minimum water resistivity at 15 °C | 1300 Ωcm |
| Activation flow | 1,4 l/min |
| Dimensions | 140x96x45 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
| Technical characteristics | Value |
|---|---|
| Model | JET 4.5 |
| Heating power | 4500 W |
| Current | 19,6 A |
| Supply voltage | 230/50 V/Hz |
| Maximum inlet water pressure | 6,5 bar |
| Minimum inlet water pressure | 0,4 bar |
| Minimum water resistivity at 15 °C | 1300 Ωcm |
| Activation flow | 1,4 l/min |
| Dimensions | 140x96x45 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
