Hi-Therm JET-E 5.0 - a compact non-pressure instantaneous electric water heater for installation under a sink or washbasin.
Top water connections allow the unit to be placed close to the draw-off point, where it supplies hot water without a storage tank. Water is heated only while it is being drawn, so the unit does not require a storage tank.
| Technical characteristics | Value |
|---|---|
| Model | JET-E 5.0 |
| Heating power | 5000 W |
| Current | 21,7 A |
| Supply voltage | 230/50 V/Hz |
| Maximum inlet water pressure | 6,5 bar |
| Minimum water resistivity at 15 °C | 1300 Ωcm |
| Activation flow | 1,5 l/min |
| Minimum power cable cross-section | 2,5 mm² |
| Dimensions | 153x134x76 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
| Technical characteristics | Value |
|---|---|
| Model | JET-E 5.0 |
| Heating power | 5000 W |
| Current | 21,7 A |
| Supply voltage | 230/50 V/Hz |
| Maximum inlet water pressure | 6,5 bar |
| Minimum water resistivity at 15 °C | 1300 Ωcm |
| Activation flow | 1,5 l/min |
| Minimum power cable cross-section | 2,5 mm² |
| Dimensions | 153x134x76 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
