Hi-Therm JET-LCD 11/13.5/15 - a pressure-type three-phase instantaneous electric water heater with electronic control and an LCD display.
The model is designed for two or three draw-off points, uses lower water connections and allows precise temperature control. Water is heated only while it is being drawn, so the unit does not require a storage tank.
| Technical characteristics | Value |
|---|---|
| Model | JET-LCD11/13.5/15 |
| Heating power | 11000/13500/15000 W |
| Current | 18/19,4/22,2 A |
| Supply voltage | 3~400/50 V/Hz |
| Maximum inlet water temperature | 60 °C |
| Flow at Δt 40 °C | 3,9/4,8/5,4 l/min |
| Working pressure range | 1,0-6,0 bar |
| Minimum power cable cross-section | 4x2,5 mm² |
| Dimensions | 447x236x108 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
| Technical characteristics | Value |
|---|---|
| Model | JET-LCD11/13.5/15 |
| Heating power | 11000/13500/15000 W |
| Current | 18/19,4/22,2 A |
| Supply voltage | 3~400/50 V/Hz |
| Maximum inlet water temperature | 60 °C |
| Flow at Δt 40 °C | 3,9/4,8/5,4 l/min |
| Working pressure range | 1,0-6,0 bar |
| Minimum power cable cross-section | 4x2,5 mm² |
| Dimensions | 447x236x108 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
