Hi-Therm JET-SMART 4.0 - a compact non-pressure instantaneous electric water heater for concealed installation under a sink or washbasin.
Top water connections simplify installation below the draw-off point, while the flow sensor starts heating automatically. Water is heated only while it is being drawn, so the unit does not require a storage tank.
| Technical characteristics | Value |
|---|---|
| Model | JET-SMART 4.0 |
| Heating power | 4000 W |
| Current | 17,4 A |
| Supply voltage | 230/50 V/Hz |
| Maximum inlet water pressure | 6,5 bar |
| Minimum water resistivity at 15 °C | 1300 Ωcm |
| Activation flow | 1,3 l/min |
| Dimensions | 143x124x71 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
| Technical characteristics | Value |
|---|---|
| Model | JET-SMART 4.0 |
| Heating power | 4000 W |
| Current | 17,4 A |
| Supply voltage | 230/50 V/Hz |
| Maximum inlet water pressure | 6,5 bar |
| Minimum water resistivity at 15 °C | 1300 Ωcm |
| Activation flow | 1,3 l/min |
| Dimensions | 143x124x71 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
