PRODUCT CATALOG
Archive
Instant electric water heater Hi-Therm JET-SMART 4.5
Photo: Instant electric water heater Hi-Therm JET-SMART 4.5
  • Photo: Instant electric water heater Hi-Therm JET-SMART 4.5

Instant electric water heater Hi-Therm JET-SMART 4.5

Model: JET-SMART 4.5

Hi-Therm JET-SMART 4.5 - a compact non-pressure instantaneous electric water heater for concealed installation under a sink or washbasin.

Top water connections simplify installation below the draw-off point, while the flow sensor starts heating automatically. Water is heated only while it is being drawn, so the unit does not require a storage tank.

  • Heating power: 4500 W
  • under-sink installation with top connections
  • Activation flow: 1,4 l/min
  • Dimensions: 143x124x71 mm
Technical characteristics of the flow heater
Model
JET-SMART 4.5
Heating power, W
4500
Current, A
19,6
Supply voltage
230/50
Maximum inlet water pressure, bar
6,5
Minimum water resistivity at 15 °C, Ωcm
1300
Activation flow, l/min
1,4
Dimensions (H x W x D), mm
143х124х71
Country of manufacture
Poland
Warranty, years
1

Technical characteristics Hi-Therm JET-SMART 4.5

Technical characteristicsValue
ModelJET-SMART 4.5
Heating power4500 W
Current19,6 A
Supply voltage230/50 V/Hz
Maximum inlet water pressure6,5 bar
Minimum water resistivity at 15 °C1300 Ωcm
Activation flow1,4 l/min
Dimensions143x124x71 mm
Country of manufacturePoland
Warranty1 year

Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.

Technical characteristics Hi-Therm JET-SMART 4.5

Technical characteristicsValue
ModelJET-SMART 4.5
Heating power4500 W
Current19,6 A
Supply voltage230/50 V/Hz
Maximum inlet water pressure6,5 bar
Minimum water resistivity at 15 °C1300 Ωcm
Activation flow1,4 l/min
Dimensions143x124x71 mm
Country of manufacturePoland
Warranty1 year

Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.