Hi-Therm JET-W 4.5 - a compact non-pressure instantaneous electric water heater for a local shower area.
The model is suited to seasonal or domestic use where hot water is required directly at the shower point. Water is heated only while it is being drawn, so the unit does not require a storage tank.
| Technical characteristics | Value |
|---|---|
| Model | JET-W 4.5 |
| Heating power | 4500 W |
| Current | 19,6 A |
| Supply voltage | 230/50 V/Hz |
| Maximum inlet water pressure | 6,5 bar |
| Minimum inlet water pressure | 0,4 bar |
| Minimum water resistivity at 15 °C | 1300 Ωcm |
| Activation flow | 1,4 l/min |
| Dimensions | 140x96x45 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
| Technical characteristics | Value |
|---|---|
| Model | JET-W 4.5 |
| Heating power | 4500 W |
| Current | 19,6 A |
| Supply voltage | 230/50 V/Hz |
| Maximum inlet water pressure | 6,5 bar |
| Minimum inlet water pressure | 0,4 bar |
| Minimum water resistivity at 15 °C | 1300 Ωcm |
| Activation flow | 1,4 l/min |
| Dimensions | 140x96x45 mm |
| Country of manufacture | Poland |
| Warranty | 1 year |
Electrical connection, circuit protection and cable cross-section must be selected for the model power and installed by a qualified specialist.
