Steel panel radiator Hi-Therm Type 20

Type 20

Hi-Therm Type 20 steel panel radiator has 2 water-carrying steel panels and no convector fins. It is intended for closed water heating systems in residential, office and commercial buildings.

Type 20 provides heat mainly through the steel panel surfaces and is suitable where a slim construction without internal convector fins is preferred.

Dimensions are selected by radiator height and length.
Operating pressure: 1.0 MPa (10 bar); test pressure: 1.3 MPa (13 bar).
Maximum heat-carrier temperature: 95°C.
Cold-rolled 1.0 mm steel panel with cataphoretic primer and white RAL 9016 finish.
Supplied with mounting brackets, plugs, air vent and product passport/warranty card.

Watch product video

Pump Specifications

Model

Type 20 / 2 panels, without convector fins

Warranty

10 years

Technical specifications radiator

Connection centre distance

H - 51 mm

Connection thread

1/2" female

Finish coating

white powder coating RAL 9016

Height, H

300 | 500 | 600 mm

Length, L

400-3000 mm, 100 mm step

Maximum operating pressure

1.0 MPa / 10 bar

Maximum operating temperature

95°C

Panel sheet thickness

1.0 mm

Primer coating

cataphoretic primer coating

Radiator depth

104 mm

Test pressure

1.3 MPa / 13 bar

Parameter	Value
Construction	2 panels, without convector fins
Height	300 \| 500 \| 600 mm
Length	400-3000 mm, 100 mm step
Depth	104 mm
Connection thread	1/2" female
Operating pressure	1.0 MPa / 10 bar
Test pressure	1.3 MPa / 13 bar
Maximum heat-carrier temperature	95°C
Panel sheet thickness	1.0 mm
Connection centre distance	H - 51 mm
Primer coating	cataphoretic primer coating
Finish	white powder coating RAL 9016
Warranty	10 years

Parameter

Value

Construction

2 panels, without convector fins

Height